INFRASTRUCTURE

We are a group of people who are explorers. We are always looking for new ways and new opportunities to create more for ourselves and for others. We find those opportunities in mining. For us, mining is more than digging out rocks from the ground to sell them. We see mining as an opportunity to create. We have explored the rich veins of Rajasthan and have discovered some of the most precious resources that this land has to offer. We have used our minds, our strength, and our determination to bring forth granite, marble, and sandstone from the earth. We are mine owners based in Rajasthan having 42 mines spread across nothern India with wide variety of exotic and granite and marble surfaces. we are also owning one of the biggest land bank of natural stones like granite, marble & sandstone in Rajasthan. Our product range is apt for uses on surfaces, as highlighters, kitchen-countertops & tabletops.

Having successfully passed through the stages of rigorous inspection, the marble reaches our state-of-the-art facility. Through ultra-modern techniques and cutting-edge machinery, these raw blocks undergo a long and patient process that reveals the true essence of marble and transforms it into works of art. 

  1. Loading marble blocks in portal garden:

Unloading raw marble blocks in the gantry yard with the help of advanced gantry cranes. 

  1. Deleting blocks:

The first step is to clean the marble blocks with distilled water to remove dust particles from the outside. 

  1. Bandage blocks:

The dresser’s team transfers the marble blocks from all sides to make their top flat and eliminate natural defects. 

  1. Reinforcement blocks:

The blocks are reinforced with fiberglass mesh using a semi-rigid reinforcement formula from Tenax S.p.A. in Verona, Italy. Once applied to all four sides, the blocks are fixed to withstand the wear and tear of Gangsaw cutting.

  1. Cutting process:

The reinforced blocks are taken to the Gangsaw machine to be made into slabs. The marble blocks are further fixed on the carriage using a wooden wedge, a mixture of plaster of Paris (POP), Wood Wool is added to protect the surface and then processed for cutting into slabs. 

  1. Non-reinforcement of marble slabs:

To ensure that the fragile slabs arrive safely at their final destination, a fiberglass mesh is reapplied to the back surface of the marble for transportation. The fiberglass mesh is removed before laying on the floor.

  1. Resin Curing Process:

After the blocks are polished, the beauty of the marble is enhanced by treatment with resin and hardener. It is mixed in a specific ratio to give each sheet the best shine and strength. The process ensures that there are no cracks in the board, excess resin on the surface is removed to strengthen and improve the surface.

  1. Dry in a heating room. 
  2. Resin application. 
  3. Removal of air from cracks
  4. Application in resin refining. 
  5. Resin polymerization. 
  6. Plates unloaded by a robot. 
  7. Police process

This process gives the boards a final finish. This is achieved by cutting-edge equipment that removes even the smallest grains even on the surface and polishes them to ensure a crystal shine on the boards. Now the marble slabs are ready to create your imagination and then go to the gallery.